Incident Response & Digital Forensics
Breach Response & Digital Forensics
Breach response and digital forensics (DFIR) from Fantasy Cybersec Inc. is the team you call when an incident is live: we contain the attack, eradicate attacker access, recover systems, and determine exactly what happened. The hotline is staffed 24/7/365 with a 12-minute average response, remote work begins within the hour, and on-site responders reach the DC metro within four hours. It serves federal agencies, state and local governments, and mid-market companies across the DMV. Emergency work is billed at rates quoted in writing before we begin, and most investigations run 2 to 6 weeks.
What’s Included
- Hotline triage and incident scoping within the first hour
- Containment plan and execution, including network isolation and credential lockdown
- Eradication of attacker access and closure of the entry point
- Forensic memory and disk analysis with chain-of-custody documentation
- Scope-of-compromise and root-cause report usable by regulators, insurers, and law enforcement
- Ransomware recovery support, from backup triage to restoration sequencing
- Executive briefings and stakeholder communication support
If You Are Breached Right Now
Work this checklist in order, and call the hotline first so a responder can guide you through the rest of it.
- Call (202) 555-0135. A senior responder answers and stays on the line while you work the rest of this list.
- Isolate, do not power off. Pull the network cable or quarantine the VLAN. Powering down destroys the memory evidence that shows what the attacker ran.
- Preserve what the attacker left. Keep the ransom note, the phishing email, and any odd files exactly where they sit. Photograph screens if a machine must move.
- Hold off on wiping or reimaging. Cleanup before forensics erases the answers to who, how, and how far.
- Start a written timeline. Record who noticed what, when, and everything touched since. Your notes become the backbone of the investigation.
- Alert legal and your cyber insurer now. Many policies require the insurer to be engaged within hours of discovery, and counsel should see external communications before they go out.
- Wait on password resets. Until attacker access is confirmed contained, new credentials just get stolen too.
How It Works
Our method follows the NIST SP 800-61 incident handling lifecycle, with forensics running in parallel from the first hour instead of after the fact. The practice is led by Priya Nair, a former state fusion center CERT lead who has run more than 200 breach responses, from county-government ransomware to law-firm business email compromise.
Contain, hours 1 to 24. The first call scopes the incident with you: what was noticed, what is encrypted or locked, what evidence still exists. Volatile memory is captured before anything is touched. Then we isolate segments, disable compromised accounts, and block attacker command-and-control channels until the intruder has lost control of your environment.
Eradicate, days 1 to 7. Persistence mechanisms come out, the entry point gets identified and closed, and compromised hosts are rebuilt or cleaned in a verified order. Credential resets happen here, once we know the attacker cannot simply re-steal them.
Investigate, in parallel. GCFA-certified analysts capture and examine memory images and disk artifacts: master file table records, Windows event logs, registry hives, scheduled tasks, and prefetch data. From those artifacts we reconstruct the attacker's timeline, determine initial access, and define the scope of compromise, including any data copied out of your environment. Everything is logged under chain of custody using methods aligned to NIST SP 800-86, so the findings hold up with regulators, insurers, and law enforcement.
Recover. Backup integrity gets verified before anything is restored, then systems return in the order your business priorities demand. A period of elevated monitoring follows, because attackers who lose one foothold often try to return through another.
Close. You receive a final report with root cause, scope, and evidence exhibits, an executive briefing for leadership, and a lessons-learned session with your response team.
Ransomware is the most common call we take, and it runs on a dedicated playbook: rapid scope determination, backup integrity checks, decryption-options analysis, and restoration sequencing that brings revenue-critical systems back first. For why these attacks keep landing on state and local governments, read why ransomware targets state and local government.
Who It's For
Federal Agencies and Contractors
Evidence from a federal incident can end up in a regulator's hands, a watchdog report, or a law enforcement referral. Our responders document to that standard from the first hour. Cleared personnel are available, the work can be purchased through GSA MAS SIN 54151HACS, and reporting-chain deadlines drive our update cadence rather than fight it.
State and Local Government
County IT teams rarely have a forensic lab, and that is fine: our on-site responders bring one. We have worked inside government emergency operations centers, coordinated with fusion centers, and briefed elected officials who needed plain answers about what was encrypted and what was not. See how we work with state and local government clients once the incident is closed and the hardening begins.
Commercial Mid-Market
Law firms, fintechs, and associations across the DMV usually call us about business email compromise and wire fraud, where minutes decide whether money is recoverable. Many of these clients hold an incident response retainer so the first call starts work instead of a contract negotiation.
Cost and Timeline
Emergency breach response is billed at time-and-materials emergency rates, quoted in writing before work begins, so you approve costs while containment is underway rather than after it. Retainer clients draw down pre-purchased hours at their contracted rate instead.
Containment starts within the first hour of your call. Most investigations run 2 to 6 weeks from triage to the final report, depending on environment size and how well evidence was preserved in the first hours. The final forensic report follows within two weeks of the last evidence collection.
For anything that is not an emergency, like standing arrangements and scoping questions, talk to an advisor. The hotline stays open either way.
Proof, not promises.
A Mid-Atlantic county government called at 5:40 AM on a holiday Monday after ransomware encrypted file servers across three departments. Memory forensics traced initial access to a phished credential 11 days earlier, attacker access was contained the same day, and 94% of affected systems were restored from offline backups within six days. The final report, with full chain-of-custody documentation, supported the county's insurance claim and its referral to the state fusion center.
Frequently Asked Questions
What should we do in the first hour of a suspected breach?
Call (202) 555-0135 and isolate affected systems from the network without powering them off. Do not wipe, reimage, or reset credentials yet. Preserve the ransom note or phishing email, and start a written log of who noticed what, when.
How fast can a DFIR team be on site in Washington, DC?
Remote work begins within one hour of your call, and on-site responders reach Washington, DC, Maryland, or Northern Virginia within four hours of the request. The hotline is staffed 24/7/365 with a 12-minute average response.
Will your forensic findings stand up with regulators, insurers, or law enforcement?
Yes. Evidence is collected under documented chain of custody and analyzed using methods aligned to NIST SP 800-86 by GCFA-certified analysts. Our reports are written to be handed to regulators, cyber insurers, and law enforcement without rework.
How long does a breach investigation take?
Containment starts within the first hour of the call. Most investigations run 2 to 6 weeks from triage to the final report, depending on environment size and how well evidence was preserved in the first hours.
What does breach response cost?
Emergency work is billed at time-and-materials emergency rates, quoted in writing before work begins, so you approve costs while the response is underway. Retainer clients draw down pre-purchased hours at their contracted rate.
Do you handle ransomware specifically?
Yes, and it is our most common engagement. We contain the spread, determine how the attackers got in and how long they were inside, verify which backups are clean, and sequence restoration so you come back online in a defensible order.
Related Services
Incident Response Retainer
24/7 incident response retainers from a DC-based DFIR team: 12-minute average hotline response, published SLAs, and hour rollover. Talk to an advisor today.
Why Ransomware Targets State and Local Government — and What Actually Helps
Ransomware hits state and local agencies because attackers expect aging systems and small teams. What helps costs less than a breach.
Cybersecurity for State & Local Government
StateRAMP and CJIS support, ransomware defense and 24/7 incident response for state and local government in DC, Maryland and Virginia. Talk to an advisor.
Contact Fantasy Cybersec Inc.
Contact Fantasy Cybersec Inc. in Washington, DC: call (202) 555-0135, email info@fancyber.newo.click, or the form. Senior advisors reply in one business day.
Ready to prove your security?
Talk to a senior advisor about your assessment, compliance, or incident-response needs. We respond within one business day.
Talk to an Advisor Explore Services24/7 Incident Hotline: (202) 555-0135